Deploying control systems in hazardous environments? Integrating E-T-A's Class I, Division 2 circuit protection products into your control systems allows you to: streamline control panels, reduce space required for circuit protection by 50% per pole compared to other devices on the market, optimize supply chain for circuit protection components.
Visit E-T-A Circuit Breakers at OTC 2018 Booth Number 8559 to learn more.
24VDC Class I, Division 2 Electronic Circuit Protector
The ESX10-T electronic circuit protector is dedicated to 24 VDC powered systems for current based loads from 0.5 amps to 12 amps. This technology provides the fastest overload detection and disconnection compared to any other circuit breaker technology in the industry. This solid-state device outperforms any typical thermal-magnetic breaker available today. The ESX10-T has a red/green LED mounted on the face which allows for immediate visual indication of the circuit breakers output status to simplify of I/O field device troubleshooting.
The ESX10-T is accompanied has several hazardous location approvals based on it inherit solid state design, including: UL 1604, CSA 22.2, No: 213, and ATEX, making it ideal for control panels deployed in hazardous with Class I, Division 2 switch mode power supplies, I/O modules, terminal blocks, and industrial switches. The ESX10-T is also remotely resettable and UL 508 approved, making it ideal for SCADA/RTU applications.
120 VAC Class I, Division 2 Magnetic-Hydraulic MCB
Integrating E-T-A's 4231-T Class I, Division 2 circuit breaker into your control systems allows you to: streamline control panels, reduce space required for circuit protection by 50% per pole compared to other devices on the market, optimize supply chain for circuit protection components.
E-T-A’s 4231-T is approved to UL1077, CSA22.2, and UL Class I Division 2, Groups A, B, C, D. The Class I, Division 2 approval allows engineers deploying control systems in hazardous locations to eliminate NEMA 7 enclosures and/or Purge Systems in most applications.
E-T-A’s 4231-T is in the same industry standard footprint as Miniature Circuit Breakers (MCB) - 17.6 mm wide. Allowing engineers to save almost 50% per pole compared to other 120VAC Class I, Division 2 devices on the market.
Up to now, engineers purchased AC Class I, Division 2 circuit breakers from an alternative source. With the addition of E-T-A's new 4231-T, engineers can purchase all of their Class I, Division 2 circuit protection components from one supplier.
Touch Safe Panelboard Power Distribution System
Looking for a flexible, touch safe panelboard power distribution system? XSVS is a patented cULus listed panelboard with a universal architecture compatible with all UL489 molded case breakers and UL489 miniature circuit breakers on the market.
The XSVS is sold in standard configurations: 12, 24, 36, 42 and 72 circuits and is the only UL67 and CSA22.2 panelboard power distribution system offering modular flexibility. The system modularity allows engineers to configure the XSVS based on the number of circuits required in their application.
The system is touch safe and designed to insulate electrical components and isolate electrical arcs from service personnel. This makes the XSVS the ideal solution for applications where UL67 panelboards are required by the National Electrical Code (NEC) including: industrial facilities, data centers, manufacturing facilities, laboratories, heath care facilities, and warehouses.